Programmer’s Guide
ITherm™ POSjet™ BANKjet™
Configuration
Ethernet Adapter
Apr-04
Rev C
Page 27
The Reset Button
The reset button provides three functions.
1. Resetting the print server.
2. Printing the print server configuration.
3. Resetting the print server configuration to the default.
Briefly pressing and releasing the reset button for less than 1 second will reset the print server.
This will clear all pending print in the buffers and restart the adapter.
Briefly pressing the reset button for about 1 second, releasing it for about 1 second and then
pressing and holding it will reset the adapter and force it to print it’s configuration.
Pressing and holding the reset button for about 5 seconds, will reset the adapters configuration to
factory defaults.
Installing Windows
TM
Printer Drivers
Printer Driver Installation Instructions for XP
NOTE: (Note Windows 2000 is similar but not identical)
1. Insert the “Windows XP, 2000 printer driver” floppy disk into your diskette drive.
2. Click on “
Start
” menu -> “
Settings
” -> “
Printers
”.
3. Double Click on “
Add Printer
” Icon.
4. Select Next then select “Local printer attached to this computer” then Click Next
5. Select Create a new port and then select Standard TCP/IP Port in the window and click
Next
6. Select next
7. Enter the IP address of the printer, and optional a printer name then click Next
8. Select Next to the defaults.
9. Select Finish.
You now have to install the TransAct Driver
10. If you have the driver already loaded on the system select it any you are done. If not
select have disk.
11. Select A:\ or where ever the driver is located.
12. Follow the instructions and you are done.
It may be necessary to change the IP address being used by the adapter.
1. Select Start->Settings->Printers
2. Open the Printer
3. Select Printer->Properties
