7
Introduction
© 2017 ITEL SNC
1.5
EXT CNT connector
The EXT CNT connector is intended for parallel inputs control.
Switching inputs are designed to be coupled to open-collector outputs: no voltage is allowed to enter
into the inputs.
The Mpx output switching, from network to local mpx, is done when the "Par" control is selected
under System menu > Split Control and when its corresponding switching control input is driven to
ground.
Yellow pins are the switching controls for module 1, red pins are for module 2.
Summary of Contents for MPX-S
Page 3: ...Section 1 Introduction...
Page 10: ...Section 2 Front panel display...
