6
CUSTOMER SUPPORT TEAM:
+44 (0) 333 220 6058
BATTERIES
Open the battery compartment located at the
back of the phone and place 4 x AA batteries
(not included) taking care not to reverse the
poles. Close the battery compartment.
INSTALLATION
1. To assemble the phone, attach the stand
to the bottom on the phone.
2. Place the phone on a flat surface,
positioned so that the telephone cable
will reach your telephone line or extension
socket.
3. Plug the coiled handset cord into the
handset. Plug the other end into the
socket on the left of the base unit.
4. Place the handset on the unit.
5. Plug the telephone cable into the socket
at the back of the base unit. Insert the
other end of the cable into your telephone
socket.
6. Lift the handset and check for a dial tone.
Note:
If you connect the telephone to a line
with a broadband (ADSL) connection, you
must use a micro-filter between the telephone
and the telephone line; otherwise you may get
interference between the telephone and the
broadband.
WALL MOUNT
When wall mounting the phone, ensure that it
is close to a telephone wall socket, so that the
included cable can be easily connected.
1. To wall mount, measure the distance
between the two mounting brackets on
the back of the phone.
2. With a pencil, mark two fixing hole
positions on the wall.
3. Drill the wall and insert wall plugs to
mount the phone.
4. Hang the phone.
USING YOUR APPLIANCE
On-Hook Mode:
When the handset is in the cradle
Off-Hook Mode:
When the handset is out of the cradle – i.e. in
your hand or placed down on a surface.
CONTROLS
Flash key:
Use to transfer a phone call internally. To
transfer a phone call to an internal number,
press the flash key and enter the new number.
The flash key also allows you to switch to
another incoming call if you have call waiting
service.
Hands Free:
Press the hands free button to use the phone
without having to hold the handset.
Set:
Press and hold the SET button to enter
the menu settings. Press SET to confirm a
selection.
Redial:
Press to redial a number.
Check:
Press to check outgoing calls.
M1 M2 M3:
Press to view stored numbers, or press to save
and store a number.
