When using electrical appliances, basic safety precautions should always be taken.
This unit is not intended for use by children or the infirm. They should be given
supervision and instruction on the use of the appliance by a person responsible for their safety.
ensure the unit is not too close to heat emitting devices or placed in direct sunlight.
check that the voltage indicated on the data plate corresponds with that of the local
network before connecting the unit to the power supply.
do not leave the unit unattended while connected to the power supply.
do not immerse the unit in water or any other liquids.
It is imperative to unplug the power cord after the unit has been used, before it is cleaned
and while being repaired.
close supervision is required when using this unit near children.
never leave the unit within reach of children.
repairs to electrical devices should only be performed by qualified personnel.
Improper repairs may place user at serious risk.
This unit is intended for household use only and should not be used for industrial or commercial
purposes.
do not operate this unit with a damaged plug or cord, after a malfunction or after being dropped
or damaged in any way.
do not use this unit for anything other than its intended use.
This unit must be placed on a stable heat resistant surface.
do not push objects into any openings as damage to the unit and/or electric shock may occur.
do not use this unit in wet or bad weather conditions.
This product is not a toy.
do not play music at excessive levels, especially near children.
SettInG uP your SPeaKer
Attaching the base
1. carefully take the tower speaker and base out of the packaging.
2. take the screws out.
3. attach the base to the body aligning the four holes in the base with the four holes in the tower
speaker.
4. Screw the base into the body.
5. Stand the tower upright on the floor. The unit is now ready for use.
IMPORTANT INSTRUCTIONS
RETAIN FOR FUTURE USE
InStructIonS for uSe
Turning the Digi tower On
Position the unit where it is going to be used. connect the ac-dc adaptor to the speaker and
plug the adaptor to the power supply. Switch the power on/off button at the back the speaker to on
position. Press the standby/on button on the top panel to turn the speaker on.
Listening to the Radio
after the speaker is turned on, press the mode button to select the fM radio mode. The led indi-
cator of fM will light up. Press the skip+ / skip- button to select the desire radio station.
adjusting the volume
1. Press the volume up/down button to adjust the speaker to the desired volume level.
2. Pressing the mute button on the remote control will mute the speaker, pressing the mute
button again will resume the sound. listening to MP3 music on an Sd/MMc card
listening to MP3 music on an Sd/MMc card
1. after the speaker is turned on, insert the Sd/MMc card to the Sd/MMc card slot.
2. Press the mode button repeatedly to select Sd/MMc card mode. The led indicator of the
Sd/MMc card slot will light up and the MP3 music in the card will play automatically.
3. Press the skip+ / skip- button to select the desired music track.
4. Inputting the track no. via the number keys on the remote control can directly select
the desired track on the Sd/MMc card.
5. Pressing the Play/Pause button will pause the music, pressing the Play/Pause button again will
resume the music.
Listening to MP3 music on a USB Flash drive
1. after the speaker is turned on, insert the flash drive into the uSB port.
2. Press the mode button repeatedly to select uSB mode. The led indicator of uSB port will
light up and the MP3 music on the flash drive will play automatically.
3. Press the skip+/skip- button to select the desired music track.
4. Inputting the track no. via the number keys on the remote control can directly select
the desired track on the flash drive.
5. Pressing the Play/Pause button will pause the music, pressing the Play/Pause button again will
resume the music.
I58004_IM.indd 6-7
3/13/2013 4:01:47 PM