INPut Commands
Copyright © Itech Electronic Co., Ltd.
57
Chapter12 INPut Commands
[:INPut]:HARMonics:ORDer <NRI>
This command is used to set the harmonic analyse orders.
Command Syntax
HARMonics:ORDer <NRI>
Parameters
2-50
Query Syntax
HARMonics:ORDer?
[:INPut]:HARMonic:PLLSource <OFF|U|I>
This command set PLL (Phase Locked Loop)source which is used for
determining the fundamental wave cycle as the reference for analysis of
harmonic orders.
Command Syntax
HARMonic:PLLSource <OFF|U|I>
Parameters
OFF|U|I
Query Syntax
HARMonic:PLLSource?
[:INPut]:HARMonics:THD <THDR|THDF>
This command is used to set the calculation formula of THD(Total Harmonic
Distrotion).
Command Syntax
HARMonics:THD <THDR|THDF>
Parameters
THDR|THDF
Query Syntax
HARMonics:THD?
[:INPut]:HARMonic:SEQuence <ALL|ODD|EVEN>
This command is used to select the harmonic sequence of ALL/ODD/EVEN.
