Quick
Start
Copyright © ITECH Electronic Co., Ltd.
16
The detail of the red box in the figure above is as shown as follows:
1. Input terminal
2. GPIB interface
3. LAN interface
4. USB interface
5. RS232 interface
6. CAN interface( Optional ), external triggering terminal, external On/Off
control terminal and voltage fault indication terminal.
7. System bus
8. Current monitoring terminal
9. External analog 0-10 V control terminal and remote sense compensation
terminal
Note
2
7
U and 37U rear panel terminals are exactly the same, please refer to the above
description, the following will not be repeated.
Rear panel terminal
AC power switch and
AC power input terminal
