Quick Reference
Copyright ©ITECH Electronic Co., Ltd.
10
1 Power Switch
2 USB interface /Print/Trig/Menu
3 LCD touch screen
4 Function key
5 Number key
6 Up, down, left and right key and enter key
7 Rotary knob
8 Vent hole
1.3 Keyboard Introduction
The keyboard introduction of IT7800 series Power Supply is shown as follows.
Keys
Description
Used for saving screen images
Trig
Used for manual trigger
Power
Power Switch
Menu
Used for going back to menu page
[V-set]
Set the output voltage value
[F-set]
•
AC mode: set the output frequency
•
DC mode:
[F-set]
is invalid
Config
Enter to Configuration menu
Basic metering key used for basic metering.
Waveform Display key When this key is pressed, the
waveform corresponding to current measurement data
will be displayed.
Harmonic Measurement key When this key is pressed,
the harmonic measurement results and the menu of
harmonic measurement parameter configuration will be
displayed.
[On/Off]
Turn the power supply output on or off. When lit,
