www.itec-audio.com
3
MICROPHONES
ITEC 716 WIRELESS SYSTEMS
2.1.1. Receiver Installation
For best operation, the receiver should be at least 1m
above the ground and at least 1m away from a wall or
metal surface to minimize reflection. The transmitter
should also be at least 1m away from a wall or metal
surface to minimize reflection. The transmitter should
also be at least 1m away from the receiver, as shown
in Fig.1.
Keep antennas away from noise source such as
motors, automobiles, neon light as well as large metal
objects.
Fig. 1
2.1.2. Audio output connection
There are two audio outputs on the back of the Diversity SDR receivers. Mic-level balanced and
Line-level unbalanced. Use shielded audio cable for the connection between the receiver and the
mixer. If the mixer / amp is a 1/4“ phone jack, connect a cable from the 1/4“ unbalanced audio
output from the receiver to the mixer / amp. If the mixer has an XLR input, connect a cable from
the balanced XLR audio output from the receiver to the mixer input. Audio output connection is as
Fig.2.
Bild 2
Fig. 2