Itec DR-5300, Manual, Page: 8 / 16

8
www.itec-audio.com MICROPHONES
ITEC 5300 RADIO MICROPHONE SYSTEMS
4. Pocket transmitter
4.1. ITEC WT-5300
HEADSET CONECTOR, LAVALIER MICROPHONE ETC.
MUTE BUTTON
DISPLAY:
GROUP, CHANNEL AND BATTERY
BATTERY COMPARTMENT
TRANSMISSION
ANTENNA
SET BUTTON
MODE BUTTON
IR DIODE
ON/OFF BUTTON
4.1.1 Settings
The current settings are displayed by pressing the MODE button. To change a value, the SET button must
be pressed for 10 seconds. When the display flashes, the value can be changed by pressing the SET button
again.
Display/selection option Note
GRP CH XX XX
Display only - Change by IR signal from the receiver
FREQ XXX.XXX MHz
Display only - Change by IR signal from the receiver
AF-GAIN -18 -12 -6 0 +6 +12 Amplification -18dB (line) to +12dB (microphone level)
RF-Power LOW HI Setting the transmission power
MUTE
MODE
Disable Manual
Activated (manual) or deactivated (disable) the MUTE
button on the device
SET LOCK Unlock Lock
Locking of the button function including the On/Off
button (power lock)
4.1.2 Battery change
Open pocket transmitter cover by pressing left and right snapper
simultaneously. Insert two new batteries. Note the poles (minus
pole at spring contact, left)! Battery type: 2 „AA“ 1.5V Mignon
Battery status on display.