DIGIPOWER 4X150T/02_EN_2016/05_REV_2020/02
ITEC-Tontechnik und Industrieelektronik GesmbH, A-8200 Gleisdorf, Lassnitzthal 300
Tel.: +43 (0)3133 / 3780-0, of
fi
[email protected], www.itec-audio.com
DIGIPOWER 4x150T/02 - SPECIFICATIONS
482 mm
88 mm
Depth: 280 mm
431 mm
All Informations without garantee. Subject to technical changes.
TYPE
4x150T/02
Output Power (RMS) @ 24 VDC (20 Ohm 100 V)
4 x 150 W
THD + N
< 0,29 %
Input sensitivity 90Hz - 20 kHz
1V eff
Input Impedance
10 kOhm
Signal-to-Noise Ratio @ 1 kHz, 250 W, Vol 0.5
85 dB
Output transformer
50 V / 100 V
Current consumption 230 VAC sinus 100V @ 40 Ohms
3.7A
Current consumption 24 VDC sinus 100V @ 40 Ohms
27A
Current consumption Standby 230 VAC
0.045 A
Current consumption Standby 24 VDC
0.16A
Power consumption in standby mode (230 V)
10 W
Power consumption at full load (230 V)
851 W
Inputs
symmetrical on screw terminal
Supply voltage
230 VAC / 24 VDC
Operating temperature
-5° C bis +40° C
Protection circuits
DC, short circuit, resonance, over temperature
Frequency response
80 Hz ÷ 22 kHz / -3 dB
Dimensions
19“ / 2 RU (482 mm x 88 mm x 302mm)
Weight
17.1 kg
