background image

2

Precautions

Safety Tips

Please read this manual carefully before use the Camera.

To avoid damage from stress, violent vibration, soaking during transportation, storage and installation.

Take care of each components of Camera during installation, and install camera at where is affordable
enough, to avoid drop or scratches of camera case.

Do not apply excessive voltage. (Use only the specified voltage.) Otherwise, you may get an electric shock
or a fire may occur.

Keep the transmission of RS-485, Video signal away from powerful electromagnetic radiation resources.

Do not shoot images that are extremely bright (e.g., light sources, the sun, etc.) for long periods of time. Do
not use or store the camera in the specified extreme conditions. (Please refer to specification sheet of
camera.)

Do not clean camera with active chemical or corrosive detergents, and remove dust or dirt on the surface of
the lens with a blower (Commercially available)

Do not disassemble any camera components, in case of abnormal operation, contact your authorized dealer
or the store where you purchased the product.

After long time operation, these components may get machine wear like Motor, slip ring, you can contact for
repair or change, the local dealer or the shop where you bought this camera.

Supplied Accessories

HD Color Video Camera (1)

12V/2.0A DC Power adaptor (1)

Installation bracket (1) Installation screw (1)

USB3.0 data lines (3m),serial control line,RS-232C to RS-485 cable

IR Remote Controller (1)

User’s Manual (1)

Main Features

Camera and Lens

Video CMOS Sensor: 1/2.8" Type Exmor CMOS 3.27 Megapixel
Image: 16:9 3.27 pixel
Video Signal:
60Hz mode, camera output 1080p30 as default, support 1080p@30/25/20/15/10/5, 720p, 800x600,

640x480/60/50/30/25/20/15/10/5;

50Hz mode, camera output 1080p@25 as default, support 1080p@25/20/15/10/5, 720p, 800x600,

640x480/50/25/20/15/10/5;

Lens zoom: 20 Optical x 12 digital zoom, f=4.7-90mm F1.6-3.5
Wide angle lens: 55.4 degree
Minimum Illumination: 0.1Lux
White Balance: Auto/Sunlight/Cloudiness/Shade/fluorescence white balance
Focus: Auto/Manual
Iris: Auto/Manual
Shutter Speed: 1/1 - 1/10,000S
Black light compensation: On/Off

Summary of Contents for TS-0695

















Reviews: