ITC T-B20, Operation Manual

Page: 10 / 14

O P E R AT I O N I L L U S T R AT I O N
10
5.7 The Blue tooth function operation instruction on the mobile-phone
Press the "MODE" button on the MP3 player to set it on Blue tooth mode.
Find the Blue tooth setting on the mobile-phone.
Turn on the Blue tooth of the mobile-phone. If the Blue tooth is on, then skip this step.
As the systems of the mobile-phones vary, the setting screen may have slightly difference.
It needs to note that the mobile-phone needs to be set Visible to all nearby Blue tooth devices.
Otherwise, it may fail to do the searching and matching.
When the device is found, choose it to connect with the MP3 player. Then the music of the
mobile-phone can be played on the amplifier.
5.6 The Operation Instruction of Built-in MP3
The MP3 can be switched on/off separately. The USB interface and SD card take the priority of others.
"OFF/ON" switch: when the switch is set to ON, the power is on; when the switch set to OFF,
the power is off.
"MODE" button: there are 3 modes for choice: radio, blue tooth, audio.
" " button: short press to select the previous track, long press to reduce the volume.
" " button: in the audio status, press the first time to pause, the second time to continue.
" " button: short press to select the next track, long press to increase the volume.
The "RPT" button on the remote control can set two modes: single cycle and all cycle.
The "EQ" button on the remote control can choose different sound effects according to the users
preferences.
Note:
1. The user needs to push the button with a proper strength to avoid destroying the button.
2. Operate the remote control in a possibly short range since when obstacles exist, the remote
control can not work in a long distance.
3. If the button is loose or fail to work, please change the remote control or battery. If the problems
occur again, please contact the supplier.
4. The SD card or USB interface must be inserted in the right way to avoid the damage to the SD
card or USB interface.