4
II. Operation Receiver
1. Make sure that the transmitter is powered off before turning the
receiver’ s power on. Press the receiver power key, the LCD will
glow and turn on. Then press
“ ▲ ▼ ”
to choose function and
channel, press SET key to confirm the set. Check RF and AF signal
strength when the transmitter signal becomes noisy, weak or fails.
Then press “◄” or “►” to choose a clearer channel, press SET key
to confirm.
2. Press and hold the power key for 3 seconds to turn the receiver
Off.
III. Operation of the LCD display
①
RF bar indicators: 8-bar indicates the strength of radio frequency
signal.
②
AF bar indicators: 8-bar indicates the strength of audio signal
③
When the LCD shows FREQU, it is the current working frequency
④
When the LCD shows CHANNL, it is the current working channel.
⑤
6-segment shows: frequency, channel and menu.
⑥
Mute sign shows that no RF signal is received.
Press and hold “SET” key to choose or confirm. Press
“▲▼”
key to change current frequency or channel then press “SET” key
