v.081125
5
ENGLISH
n
Keep the vents clear of dust and debris. This will help prevent possible
electrical shorts and ensure proper cooling.
n
Keep the tool housing clean, free of oil and grease by using mild soap and
a damp (not wet) cloth.
n
Inspect the cord regularly and have it replaced by an authorized repair
facility if it is damaged.
n
Lubrication for this tool is done at the factory and should not be necessary
again under normal use.
n
An authorized repair centre should do any repairs, modification, or
maintenance that involve disassembling the tool.
n
Any damage to the tool should be corrected at an authorized repair centre.
MAINTENANCE
Please refer to the schematic drawing on page 11.
No.
Description
No.
Description
1
Screw
18
Carbon brush
2
Spring washer
19
Brush holder
3
3/8" Chuck
20
Gear shaft
4
Motor housing
21
Ball bearing
5
Gear housing
22
Armature
6
Ball bearing
23
Ball bearing
7
Pin
24
Armature
8
Gear
25
Ball bearing
9
Shaft
26
Field
10
Gear
27
Screw
11
Gear shaft
28
Switch
12
Ball bearing
29
Cord
13
Gear
30
Screw
14
Ball bearing
31
Inductor “A”
15
Gear housing
32
Inductor “B”
16
Motor housing cover
33
Capacitor
17
Brush holder cover
WARRANTY
ITC branded power tools, air nailers staplers and compressors are designed for
use in DIY (do-it-yourself), light or intermittent duty, semi-professional applications.
They are not intended for use in professional, production, industrial or continual
use applications.
ITC makes every effort to ensure that its products meet high quality and durability
standards and are warranted for two years against manufacturers’ faults and
defects for a period of two years from the date of purchase to the original owner.
ITC will REPAIR OR REPLACE (at our discretion) merchandise deemed by the
company to be defective, provided that it is has not been misused, abused, altered,
or repaired by anyone other than an authorized repair centre.
Please consult the ITC catalogue or your nearest ITC distributor to determine
those products that are covered by our over-the counter warranty. Any ITC tool
that fails during normal use and within the specified warranty period and qualifies
for over-the counter warranty must be returned to its point of purchase for
replacement or credit. Any item not listed as over-the-counter warranty must be
shipped, prepaid freight, to an authorized repair depot accompanied by a copy of
the invoice specifying the date that the item was purchased. Returned tools that
are not accompanied by a proof of purchase (Copy of Invoice) will not be repaired
or replaced under warranty.
This warranty does not extend to normal wear or consumable parts such as brad
and staple gun driver blades, grinding discs, saw blades, driver bits, electric motor
brushes, worn chords, etc. It also does not apply to ITC tools used in professional,
production, industrial or continual use applications.
For a listing of the authorized repair centers please refer to the ITC catalogue.
PARTS LIST