functions to the device.
User Password
This is the password for the “user” account. Users must keep this password a
secret to avoid unauthorized access.
IP Via
The selection allows DHCP or Static IP assignment to the Ethernet interface
of the device. If DHCP is selected the device will acquire its IP address
dynamically.
HTTP Server Port
This is the HTTP server port. It can be customized to allow connection via
HTTP in environments where the traditional HTTP ports are filtered.
Use NAT
This option allows NAT (network address translation) utilization if the device
supports multiple network adapters such as Ethernet and Wireless network
adapter.
Static IP
This is the static IP Address of the device. This IP address will be ignored in
the DHCP Server selection is enabled. The Static IP address will still be saved
in the memory.
NetMask
This is the Network Mask for the Static IP address. The default value is:
255.255.255.0. This network mask will be ignored in the DHCP Server
selection is enabled.
Uplink Gateway
This is the IP address of the Uplink Gateway required to connect the device to
the outside network (Internet). Usually this is the IP address of the Home
router or the Business NAT Firewall. This IP address will be ignored in the
DHCP Server selection is enabled.
DNS Server
This is the IP address of the DNS server. The DNS IP address will be ignored
in the DHCP Server selection is enabled.
User Remote Config
This option enabled the automated remote provisioning of the device. Once
configured, the device will try to retrieve its configuration form the selected
remote location in the Remote Config URL field. This option should be
enabled if this device is bind to a service provider.
Remote Config URL
This field is used to store the location of the remote configuration script for
the device. If this device is bind to a service provider this filed should point to
the URL of the provisioning agent or program. The device will automatically
insert Version and MAC information into the target URL.
Auto Upgrade
This option is used to enable device auto upgrading. Once checked the device
will retrieve information form the URL location specified in the Remote
Upgrade URL and attempt to retrieve newer firmware images. This option is
also used by service providers to allow automated management and upgrade
of large number of devices.
Remote Upgrade URL
This is the URL location of the firmware image that the will retrieve and
automatically install. The URL is usually a dynamic CGI script that allows
selective upgrade based on reported device version. The device will
automatically insert Version and MAC information into the target URL.
Debug Server IP
This is the IP of the debug server that will accept all debug messages that are
spooled from the device. The debug server IP is used to collect all debug
messages from the device.
Debug Server Port
This is the Listening Port of the Debug Server that will collect the debug
information send from the device.
Ring Volume
This is the Ring Volume
Phone In Volume
This is the volume of the audio from the phone to the FXS port of the device
Phone Out Volume
This is the volume of the audio from the FXS port of the device to the phone
Device Speaker Volume
This is the volume of the device speaker or RCA audio output
Device Mic Volume
This is the volume of the device microphone
Country
This is the country location of the device
64
TV BOX - ITC KM250/KM320
ITC Global Media
