230 E. Lakewood Blvd. • P.O. Box 8338 • Holland • MI • 49422-8338
Phone: 616-396-1355 • Fax: 616-396-1152 •
www.elio-itc.com
•
• Revision 1: 11/18/11
Drink Holder Installation Instructions
1.
Determine your installation location. Once determined drill a
3-5/8” hole using a hole saw (Note: For part #81427SS304 you
will need to drill a 4” hole).
2.
If installing a standard drink holder proceed to step 3. If
installing the lit drink holder, push the LED assembly through
the rubber grommet back into the cup holder. Insert cup
holder into the hole making sure to insert the wiring first.
3.
Remove the double sided tape under the rim of the drink
holder and press into the hole you made in step 1.
4.
For the lit version; once the holder is in place, push the LED
assembly back through the rubber grommet.
5.
When wiring the lit version to the power source be sure to
wire the positive line (red) to the positive side and the black
line (neutral) to the neutral side.
6.
Contact ITC customer service at 888-871-8860 with questions
regarding the installation
of this product.
Power Source
+
-
