Please note:
For your own safety please set your chosen Virtue before you activate the iTaste
134 MX-M. Innokin Technology is not responsible for any damage or injury if the
Virtue has not been selected. We strongly recommend that you set your desired
Virtue before you activate the device.
To set your desired desired Virtue:
Step 1:
Place the iTaste 134 MX-M on a flat surface. Carefully unscrew the iTaste 134 MX-M 1
st
top ring. This will expose the top of the 2
nd
ring. The 2nd ring has the 8 Virtues printed
on top with arrows pointing toward the inner pin.
Step 2:
Very carefully lift the 2
nd
ring up from the center pin. This will expose a black ring with
Virtues around the outside and a golden spring with two ball bearings on top. Do not
lose these pieces.
Please carefully note the center pin. On the top of the center pin there are four
grooves. At the base of one of the grooves you will see a very small ball/metal bump.
This is the selection point. There is only 1 selection point, the base of the other 3
grooves do not have a selection point.
Choose your selected Character. Take the second ring and place it back over the
center pin. Line your selected Character and arrow to point at the selection point at
the base of the center pin.
EN-9
EN-10
Summary of Contents for 134 MX-M
Page 1: ...iTaste 134 MX M 56 96mm 128g...
Page 2: ......
