Italkero QUADRO 40, Installation And Maintenance Manual

Page: 7 / 40

ELECTRICAL CONNECTION
The appliance is always supplied ready to operate
with 4 x 1.5VDC AA batteries so it does not require
connection to the mains.
The power supply accessory allows the appliance to
operate with 230VAC mains voltage (1).
In this case it will be necessary to have an electrical
outlet within a radius of 1.5 meters.
If this accessory is used, the batteries are
automatically excluded and it is therefore
necessary to remove them, to avoid their inactivity
causing the release of liquids and damage to the
control board.
category 3P 3B/P 3+ 2E 2H 2E(R)
GAS Propane Butane -
Propane
Butane -
Propane
Methane Methane Methane
TYPES OF GAS
Before proceeding with installation, check that the data
on the label of the appliance corresponds to the type
and pressure of the gas supplied.
Gas installation and connection must be carried out
by qualified personnel, in full compliance with the
applicable Standards.
Make sure that the gas inlet duct has the appropriate
flow rate and that it has a shut-off valve near the
appliance and is easy to access.
PRE-INSTALLATION
7
GENERAL
1