Italkero Camino Series, User, Installation And Technical Assistance

Page: 27 / 32

27 CUSTOMER SERVICE
Operation
This appliance has 2 types of remote control:
A – BASIC model (supplied) with Off and flame
increase and decrease keys;
B - model with Display and Timer (optional) with
SET, Off and flame increase and decrease keys.
The remote control with Display (optional) controls 3
types of operating mode:
MAN - TEMP - TIMER .
MAN: flame intensity manual control (“ triangle7
Press the “ triangle DOWN ” key to reduce the flame
or lower pilot level. To increase or decrease the
flame, lightly press the keys “
triangle UP ” or “ trian-
gle DOWN ” (the screen will show the “ radio wave ”
transmission icon).
TEMP: regulation of flame intensity according to the
temperature set in the remote control
(see REQUIRED TEMPERATURE PROGRAM-
MING).
- with
SUN TEMP sets heating temperature.
- with MOON TEMP cuts out the heating cycle.
TIMER: control of On / Off periods according to pro-
gram set in remote control (see TIMER PROGRAM-
MING) and adjustment of flame intensity according
to the temperature set in TEMP. mode.
REPLACING THE BATTERIES
The remote-control unit and the receiver unit are
complete with batteries. To change these, remove
the shell of the respective compartments and change
them, being careful not to switch over the polarities.
Use 1 x 9V PP3 battery in the remote-control unit
and 4 x 1.5V AA in the receiver unit.
The Remote-control unit with Display (optional)
has a small buffer battery (about 10 seconds)
which allows changing the down battery without
loss of data set by user.
The old batteries must be disposed of in accor-
dance with applicable regulations.
Do not remove the batteries using metal tools as
this could seriously damage the electronic con-
tacts.
Check annually the proper state of preservation
and operation of the batteries to avoid
any leakage that might damage the contacts and
jeopardize the operation unit.
A B
o
p
ti
o
n
a
l