10
• Do not use the device or headphones for a long period of time at a high or uncomfortable
volume level, since this can cause permanent hearing loss. If you experience any hearing loss or
ringing in the ears, consult a physician.
• Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force
on the buttons, switches or connectors
Battery powered devices:
• In the event that the device is not used for prolonged periods of time, however, it is advisable to
periodically perform some charge / discharge cycles of the battery, to prolong the life of the
battery.
Do not open:
• Do not open the device or attempt to disassemble the internal parts or modify them in any way.
The device contains no user-servicable parts. If it should appear to be malfunctioning, discontinue
use immediately and have it inspected by qualified service personnel.
Water warning:
• Do not expose the device to rain, use it near water or in damp or wet conditions on it containing
liquids which might spill into any openings. Never insert or remove an electric plug with wet hands.
If you notice any abnormality:
• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound
during use of the device, or if any unusual smells or smoke should appear to be caused by it,
immediately turn off the power switch, disconnect the electric plug from the outlet, and have the
device inspected by qualified service personnel.
GETTING STARTED
Installation
Place the speaker on a solid flat surface (table, ground, etc.) or use a solid speaker stand with
35mm flange. Make sure that all fixings are tight.
Power connection and wiring
Please connect the power cable to 110/220(230)V 50/60Hz power voltage. Make sure to set the
power input selector to the available net voltage. Connect all input/output signals with XLR and/or
6.3 mm jack cables. Do not connect multiple inputs possibilities (ex. RCA/ Jack 6,3 mm) with more
than one cable.
After you finished all audio connections set master volume (if available) to “0”. Switch on audio
source and speaker power. Set Mic/Line level to 12 o'clock position and increase master volume to
comfortable level.
E
N
G
L
I
S
H
Ø = 35 mm
