IT-IS Life Science MyGo Pro, User Manual

Page: 27 / 64

AVAILABLE TARGETS
The MyGo Pro comes pre-calibrated for over 20 different
fluorescent labels, and the software enables users to use any dye
with an emission maximum between 510nm and 750nm. A list of
the available dyes on the MyGo Pro can be viewed below:
DYE FILE GENERATION
The dye file generation analysis allows you to calibrate new
dyes that are not included in the factory-calibrated list. The
calibration is based on a PCR amplification using the relevant
dye or labelled probe. To generate your own dye file go to
Analysis > Auto Dye File Generation.
You can visit our website for more infomation on dye file
generation.
Factory Calibrated Dyes SYBR Green I, ResoLight,
FAM, VIC, HEX, Yellow 555,
Red 610, TexasRed, Cy5, CAL
540, CAL 560, CAL 590, CAL
610, CAL 635, JOE, Pulsar 650,
Quasar 570, Quasar 670,
Quasar 705, ROX, TAMRA, TET