background image

 

26

The hour display can be selected to show hours in 12-hour or 24-hour settings. (Default 24-
Hour) 
1. 

Use the OUT/+ key to toggle between “12H” or “24H”. 

2. 

Confirm with the SET key and enter the Manual time setting. 

 

MANUAL TIME SETTING: 

In case the Weather Station cannot detect the DCF-signal (for example due to disturbances, 
transmitting distance, etc.), the time can be manually set. The clock will then work as a 
normal Quartz clock. 
 
 
 
 
 
1. 

The hour digit will start flashing. 

2. 

Use the OUT/+ key to set the hour. 

3. 

Press again the SET key to set the minutes. The minute digits start flashing. 

4. 

Use the OUT/+ key to set the minutes. 

5. 

Confirm with the SET key and enter the 

Calendar setting

.  

 

Note: 

The unit will still try and receive the signal despite it being manually set. When it does 
receive the signal, it will change the manually set time into the received time. During 
reception attempts the DCF tower icon will flash. If reception has been unsuccessful, then 
the DCF tower icon will not appear but reception will still be attempted the following day. 

 

CALENDAR SETTING: 

 
 
 
 

 

 
 
 

 

The date default of the Weather station is 1. 1. 2006. Once the radio-controlled time signals 
are received, the date is automatically updated. However, if the signals are not received, the 
date can also be set manually.  
1. 

The year starts flashing. 

2. 

Use the OUT/+ key to set the year (between year 2003-2029).  

3. 

Press the SET key again to confirm and to enter the month setting. The month starts 
flashing. 

4. 

Use the OUT/+ key to set the month.  

5. 

Press the SET key again to confirm and to enter the date setting mode. The date starts 
flashing. 

6. 

Use the OUT/+ key to set the date. 

7. 

Confirm all calendar settings with the SET key and enter the 

Temperature unit 

setting

.

 

 

°C/°F TEMPERATURE SETTING: 

 

 
 
 

Hour flashing 

 

Minutes flashing 

Year  

Date and month (24hr time format) 
Month and date (12hr time format) 

Flashing 

Summary of Contents for WEATHER STATION

















Reviews: