Operation
Device overview
Device description
The
front
face of the features:
A
– The indicator light provides the status of the hardware - At power on the LED will blink 5
times with a frequency of 1Hz, then it will stay ON continuously. If LED remains blinking or it
doesn't blink on after power ON, please contact support.
B
– The grounding socket (marked GND). It represents the GND potential of the BlueBox and
its usage is optional. By default no connection to this socket is required. The grounding socket
is suitable for a 2mm Multi Contact Plug (also known as a Banana Plug).
Note that the grounding connection between the BlueBox and the Target microcontroller
development board must be established through the iC5700 grounding socket. Refer to the
iC5700 BlueBox User Manual for more details on this grounding.
C
– LIN1 and LIN2 connector
The two connectors allow up to two target LIN bus networks to be monitored.
Pin
Signal
1
NC
2
NC
3
LIN_GND
4
NC
5
SHIELD
6
NC
7
LIN
8
NC
9
LIN_VBAT*
SHIELD
GND
* The target must always provide power to the LIN VBAT connection.
