iSystem Aurora RH850, User Manual

Page: 8 / 16

Operation
Device overview
Device description
A – RH850 Aurora target pinout:
Signal
Direction
Signal
Description
Signal Pin Pin Signal
Signal
Description
Signal
Direction
I AGBT TX0_P TX0_P 1 2 Vref
Reference
Voltage
I
I AGBT TX0_N TX0_N 3 4 LPDCLK JTAG O
Ground GND 5 6 Reserved
I AGBT TX1_P TX1_P 7 8 LPDI JTAG O
I AGBT TX1_N TX1_N 9 10 LPDO JTAG I
Ground GND 11 12 nTRST JTAG O
Reserved 13 14 FLMD0 Flash Mode O
Reserved 15 16 nEVTI
Nexus Event
Input
O
Ground GND 17 18 nEVTO
Nexus Event
Output
I
Reserved 19 20 FLMD1 Flash Mode
Reserved 21 22 RESETn Reset IO
Ground GND 23 24 GND Ground
Reserved 25 26 CLK_P AGBT Clock O
Reserved 27 28 CLK_N AGBT Clock O
Ground GND 29 30 GND Ground
Reserved 31 32 LPDCLKOUT LPD I
Reserved 33 34 Reserved
34-pin ERF8 RH850 target pinout
Blue colored signals are Aurora trace signals.
Signal Direction is described from the BlueBox perspective.
Signal direction definition:
O - Output from the Active Probe to the target microcontroller
I - Input to the Active Probe from the target microcontroller