Further Active Probe Settings
This section describes winIDEA settings distinct to the RH850 Aurora Active Probe.
BlueBox iC5700 is capable of connecting to Renesas RH850 target devices through its
installed DTM module and an appropriate debug adapter 14-pin 2.54 mm LPD Adapter
(Ordering code: IASAM34RH850PIN14).
To switch from the default DTM interface use to the Active Probe use, open
Hardware menu /
Options / FNet tab
:
1. Click Refresh in Hardware menu / Options / FNet / Currently connected FNodes.
2. Click Create configurations for connected FNodes. Selected device is displayed in FNode
configurations
.
Configuration is created. Look for:
·
Listed devices with Matched FNode
·
Y (for yes) under Matched config
·
List of available networks
