5
3. Operating Instructions
You can connect your distribution system using either the HDMI or RF inputs:
3.1 Connecting to HDMI input
You can connect your HDMI source device such as SKY receiver, BluRay player or Apple
TV into the HDMI input of the modulator.
3.2 Connecting to RF Input
You can connect Freeview
TM
digital terrestrial services into the RF input. If no such services
are featured in the system, then it is recommended a 75[
W
] F-Type terminator is fitted
to this terminal. You can use a coax cable to connect the RF output to your distribution
system.
4. Lock control
This is a double use button.
You can use the
(Lock) control button on the front panel to prevent
accidental tampering after installation. A single press will either lock or
unlock the installation controls. The LED will illuminate to indicate that the
panel is locked.
The button is also used for space/delete during the menu edit function channel name.
5. Menu/OK
To access the list of functions to programme the modulator, press the
menu button once. To save the settings, press twice to confirm.
6. Parameters Setup
The following parameters can be programmed:
6.1 Output Channel Setup
Press ‘
Menu/OK
’ button and the OLED screen will display:
‘freq/ch_
**
’
.
Press the
q
or
p
buttons to select the desired output channel. If you do
not want to setup other parameters, press ‘
Menu/OK
’ button and on the
display appears
‘save config? yes (
*
) no ( )’
.
Press ‘
Menu/OK
’ again to
save the setting. To set up other parameters, press
t
or
u
to make your
selection. When all your selections are complete, press ‘
Menu/OK
’ twice to
save the settings.
