iSymphony Micro Music System with Built-in Universal Dock for iPod M1, User Manual

Page: 34 / 140

Playing MP3/WMA Audio Files Stored On SD/MMC Memory Cards
Note : The card reader in this system can only read files in MP3/WMA format. It
cannot read files in other compressed audio formats such as AAC, ATRAC, etc.
1.) Turn the system 'On' as usual.
2.) Press the
FUNCTION
button repeatedly until the main
display shows "
CARD – USB
".
3.) Insert your
SD
or
MMC
flash memory
card containing MP3/WMA audio files into the
SD/MMC card slot as shown in the
illustration.
Note : The card can only be inserted
one way. Push it in as far as it will go
until it locks in place.
4.) The player will read the information on
the card and the display will show the total number of
files 'tracks' and directories (albums) on the card.
The reader LED indicator will light up.
5.) Press the
PLAY/PAUSE
button to begin playback.
• Adjust the
VOLUME
,
EQ
, and
DBBS
controls as desired.
• You can skip tracks with the
SKIP TUNING
"
+
" or "
–
" buttons just as you would
with a normal CD.
• You can skip albums with the
ALBUM/MEM.CH
"
+
" or "
–
" buttons.
• You may press the
ID3/FM ST./ESP
button to display the album name, then
press the
SKIP TUNING
"
+
" or "
–
" buttons to skip as desired.
Note : If the album name is not recognized, or if the
album was not properly named, the display will show
“
UNKNOWN ”.
6.) Playback will continue until the last track has played and then the display will
again show the total number of tracks, albums on the card.
You may also press the
STOP
button to stop playback at any time.
7.) To remove the card from the card reader, gently pull the card straight out from
the slot. The reader indicator goes off. Return your flash memory card to its
protective storage case.
MEMORY CARD OPERATION