12
Phone lock code
The phone lock code may be set to prevent your mobile phone from
being misused. In general, this code is provided along with the mobile
phone by the manufacturer. The initial phone lock code is set to 1234
by the manufacturer. If the phone lock code is set, you need to input
the phone lock code when powering on the mobile phone.
5 BASIC FUNCTION
5.1 Powering On/Off the Mobile Phone
Hold the End key for a while to power on the mobile phone.
A power-on animation appears on the display screen.
Input the phone lock code and press the OK key if the mobile phone
prompts you to input the phone lock code. The default phone lock
code is 1234.
Enter the standby interface.
To power off the mobile phone, hold the End key for a while.
5.2 Linking to the Network
After the SIM card and the mobile phone are successfully unlocked,
the mobile phone automatically searches for an available network.
After finding a network, the mobile phone enters the standby state.
When the mobile phone is registered in the network, the name of the
network operator is displayed on the screen. Then you can dial or
receive a call.
5.3 Dial
You can dial with several ways as follows:
Input the phone number (should affix the international/national/
regional code or district code if necessary) and then press
[Send1/Send2] under the standby mode.
