background image

1.  In Standby State (solid 

RED

 LED), 

press and hold down both the ‘

UNLOCK

 

and number ’

1

’ buttons.

Solid 

RED

 LED will change to blinking 

GREEN

 and 

BLUE

 LEDs.

2.  Enter your Admin PIN (default 

11223344

’) and press the

UNLOCK’

 button.

GREEN

 and 

BLUE

 LEDs blink rapidly together for a 

few seconds then to a solid 

GREEN

 and finally a solid 

BLUE

 LED indictaing the diskAshur

 

DT

is in ‘Admin 

Mode’.

3. In Admin mode (solid 

BLUE

 LED), press 

and hold down ‘

3

’ buttons.

                

                            

                 

Solid

 

BLUE 

LED will change to blinking 

GREEN 

and 

solid 

BLUE

 LEDs.

4. Enter your 

NEW

 User PIN and press 

UNLOCK

’ button.

               

Blinking 

GREEN 

and solid 

BLUE

 LEDs will switch to 

a single 

GREEN

 LED blink and then back to blinking 

GREEN 

and solid 

BLUE

 LEDs.

5. Re-enter your 

NEW

 User PIN and press 

UNLOCK

’ button.

GREEN

 LED rapidly blinks for a few seconds then 

changes to a solid 

BLUE

 LED indicating the User PIN 

has been successfully created. 

6. To exit Admin Mode press the ‘

LOCK

’ 

button.

Solid 

RED

 LED indicates the drive is locked and in 

the standby state.

In addition to the Admin PIN, the diskAshur

 

DT

2

 can be configured with an independent User PIN.

To create a new User PIN follow the steps below.

Adding a New User PIN in addition to the Admin PIN

Unlocking with either the Admin or User PIN

Unlock with Admin PIN ( PIN +   )

1. To unlock the diskAshur

 

DT

2

 as Admin, enter your Admin PIN and then press the ‘UNLOCK’ button. 

GREEN

 and 

BLUE

 LEDs will alternately blink several times and finally changing to a solid 

GREEN

 LED 

indicating the drive is unlocked and ready to use as Admin.

Unlock with User PIN (   + PIN +   )

2. To unlock the diskAshur

 

DT

2

 as the User, press the ‘UNLOCK’ button, all LEDs will blink on and off, 

then enter your User PIN and press the ‘UNLOCK’ button again. 

GREEN

 and 

BLUE

 LEDs will alternately 

blink several times and finally changing to a solid 

GREEN

 LED indicating the drive is unlocked and 

ready to use as the User.

For more features and detailed instructions please refer to the user manual pre-loaded on your new diskAshur

 

DT

2

 

and also available on our website.

Summary of Contents for DISKASHURE DT2

























Reviews: