RAID Mode
(GAGE104U40SL-SAUF only)
CLEAR Mode
(down-down–down)
CLEAR mode is the default mode. If you want to change from CLEAR mode
to other RAID modes, please follow the procedure below.
1) turn off the power
2) adjust the RAID switch
3) press and hold the SET button and press the power button at the same time.
The buzzer will beep, which indicates RAID setup is complete.
RAID 1/10
The unit provides 2 methods to change the RAID mode:
1. Switch the 3 dips in the back of the machine.
2. Use the application (for Windows and Mac only) to manage the RAID mode.
(utility available on website www.istarusa.com)
*must set to CLEAR mode first before changing to other RAID modes
If only two HDDs are installed, it will be RAID 1. if four HDDs are installed,
it will be RAID 10. Must switch to CLEAR mode first, then set to this mode.
(up-up-down)
RAID 3
Must switch to CLEAR mode first, then set to this mode.
(up-down-down)
RAID 5
Must switch to CLEAR mode first, then set to this mode.
(down-up-down)
COMBINE Mode
Must switch to CLEAR mode first, then set to this mode.
(up-down-up)
RAID 0
Must switch to CLEARE mode first, then set to this mode.
(up-up-up)
