BPX-124-SA
Hardware Information: Rear View
D4
4-pin Molex D-type power connector
D5
40mm cooling fan (4000rpm )
D6
4x SATA 7-pin data connectors
BPX-124-SA Installation
Hard Drive Installation
3)
Press the latch left to unlock the tray, then hold the latch to pull out
the HDD tray.
Connect a 4-pin Molex connector from a power supply to the
BPX-124-SA.
Insert the trays back to the enclosure and close the latch to secure the
trays.
Connect SATA 7-pin data cables. one end to the BPX-525-SA and the
other end to a motherboard/controller
1) Install BPX-124-SA to a computer with one 5.25" drive bay available
Place HDD/SSD onto the tray, and use M3 countersink screws to
secure the HDD/SSD.
2)
Included Accessories
• Screws
• 4 SATA cables
2)
3)
D6
D4
D5
1)