115 x 100mm --- 24' X 8' --- FREESTANDING 1P XBAR --- FI 19072016
ELLIPTICAL ALUMINIUM 24' X 8' FREESTANDING GOAL FITTING INSTRUCTION
G
H
C
D
A
KEY
BARREL
LOCK
I
CROSSBAR &
UPRIGHTS MADE IN
120X100mm ALLOY
J
STEEL WEIGHTS
INTERNALLY FIXED INSIDE
80MM ALLOY GROUND FRAME.
TEL:
0114 24 34 200
SPARE PARTS
MULTI-SURFACE ANCHOR
1
1
x
x
LEFT SIDE FRAME
RIGHT SIDE FRAME
Aluminium Sections
GROUND PEG
12
x
6
x
COMPONENTS
POST SECTIONS
A
G
H
E
B
CROSSBAR SECTION
120mm x 100mm Diameter
(Elliptical)
1
x
I
BACKBAR SECTION
80mm Diameter
1
x
J
1
x
GOAL NET
24' x 8'
NET
80
x
TWIST AND LOCK NET FIXING
F
WE RESERVE THE RIGHTS TO AMEND THE SPECIFICATIONS OF OUR SOCCER PRODUCTS IN THE INTEREST OF CONTINUED
DEVELOPMENT. YOUR PRODUCT THEREFORE MAY DIFFER LIGHTLY TO THOSE ILLUSTRATED. E&OE.
WORLDWIDE © COPYRIGHT
2015 ITSA GOAL POSTS LTD, ALL RIGHTS RESERVED A REGISTERED DESIGN
4
4
x
x
BRASS BARREL LOCK
KEY
C
D
8
x
STANCHION NET TIES - SMALL
WARNING
THE GOAL MUST BE HANDLED CAREFULLY - DO NOT DRAG GOALS.
DO NOT USE GOAL FRAMES WITHOUT LOCKS. GOALS MUST ALWAYS BE FULLY
DISMANTLED AFTER USE. THE STANCHIONS ARE FOR SUPPORTING NET ONLY;
DO NOT LIFT GOAL WITH THE STANCHIONS. LONGER PEGS ARE AVAILABLE FOR
USE ON SANDY GROUND. ON GRASS, A RISK ASSESSMENT OF SOIL CONDITIONS
SUITABILITY SHOULD BE CARRIED OUT WHEN ANCHORS ARE TO BE USED.
ANY DAMAGE CAUSED BY MIS-USE IS NOT COVERED UNDER THE
GUARANTEE.
The smaller ground frame is used to make the goal look and perform better. The rear
ground frame is made to equal the weight of the crossbar to help ensure stability.
Please note: Additional counterbalance weights need to be used on artificial grass
surfaces. The multi-surface anchors can be used with bolts fixed into suitable ground
fixings.
ALL GOALS MUST BE SECURELY ANCHORED AND OR CORRECTLY COUNTER BALANCED(SUPPLIED SEPARATELY)
IN ACCORDANCE WITH CURRENT GOALPOST SAFETY STANDARDS AT ALL TIMES. CONTACT THE FOOTBALL
ASSOCIATION FOR THE LATEST SAFETY INFORMATION & READ OUR CARE AND MAINTENANCE DETAILS.
LOCK & SECURE SYSTEM
APPLY WD40 INSIDE KEY
LOCK AT START & END OF SEASON
ALL GOAL LOCKS MUST BE IN LOCK
POSITION DURING PLAY - TWO ON CROSSBAR
AND TWO ON GROUND BACKBAR.
PATENTED
A
B
European & USA Patent GB 2423260
THREAD NET CORD INTO NET FIXINGS
INSERT SEPARATE ROD IN BETWEEN
EACH FIXING TO LOCK FIXINGS TO POST
NET CORD
OPTIONAL ROD
OPTIONAL ROD NOT SUPPLIED WITH GOAL
TEL:
0114 24 34 200
2
1
TWIST & LOCK NET FIXINGS
Twist 90 degrees to secure.
Position the fixings no more
than 340mm apart.
Fit into groove on goalpost section.
TWIST & LOCK Recessed Net Fixings
Fit the recessed goal net fixings into the rear slots on the goal post sections and twist 90
degrees to secure. Position the fixings not more than 340mm apart. The recessed net
fixings are designed to fit ITSA goal rear slotted aluminum goal posts. When goal nets
are left attached they can also be secured with a 4mm rod (optional) that can slide down
through the net fixings to prevent unauthorized removal of the net fixings or goal net.
The roof edges should be placed on
the top stanchions of the
goal frame.
To help define the roof of
the net. Tie the cord to one
side and pull the net chord
and wrap neatly around the
stanchion section.
NET
CHORD
WRAP
AROUND
STANCHION
If you are regularly
attaching or detaching the
net then apply colored
tape to the roof edges to
help identify the roof area.