Earth
Safe
Feed the three-wire cable through the tower right up to the top.
Provide suitable strain relief.
Connect the wires to the generator.
Attach the wind turbine to the tower. Be careful not to damage the cable.
Bolt the wind turbine to the tower.
Stand the tower upright.
Align the tower vertically in all directions.
Secure the vertical tower with guy wires (refer to Fig. 5:)
Remove the short-circuit.
Fig. 8:
Connecting the three-wire cable to the generato
Pull heat shrink tubing over the solder joint and shrink.
Pull a suitable shrink tube over each wire of the cable.
Twist and solder each wire of the cable to the wire from the generator
Wrap each wire with textile insulating tape.
Danger due to unsuitable tower constructions!
Only use tested mast constructions or original iSTA Breeze masts.
7
.6
Erecting the wind turbine
WARNING!
Translation of the original instructions iSTA wind turbine system
2
4
.0
7
.201
8
I00 1
7
of 2
8
Summary of Contents for Air Speed
Page 23: ......
