1/8" - 1/4"
*Magnet Replacement Kit R8911
Connect to Lamp Power
For 24V systems, apply switched
(Ignition) power to top of resistor.
For 12V systems, apply switched
(Ignition) power.
Resistor may be discarded.
Vibration Damper
Cover Magnets with epoxy
Magnets*
Blue Side Out
Pulleys
Scrape away paint
Roughtn surface w/course sandpaper
Clean surface with alcohol
Existing Oil Pan Bolt
Sensor
Sensor Wires
Connect sensor to these two terminal studs
( - ) Connect to lamp ground
( - ) Connect to D.C. Common
(ground) and one sensor wire
Rear View of Gauge
