The push-button B on the LCN-AT2 carries out the HIT function on the subsequent key.
The range with HF transfer (when pressing push-button) has a maximum of 50m in free
environment. Please make sure, that the commands on both push-buttons from all of the
LCN-ATW´s in the wireless receiving area are detected and redirected to the connected
Bus module - see also installation guide LCN-ATW.
(LF = low frequency with 125kHz, communication ATW -> AT2
HF = high frequency with 868MHz, communication AT2 -> ATW)
Further functions
The transponders have in addition to their active chip, a
second passive transponder chip.
The passive transponder is coded with the same ID, so
that it is possible to combine an access control system
with LCN-ATW and -ULT.
The range when detected by the LCN-ULT, is approx.
10-20mm - see illustration.
transponder reader LCN-ULT
LCN-AT2
approx.
10-20mm
passive
transponder
LCN-AT2
Installation guide
Local Control Network - building controls in perfection
®
3
