IMPRESISON™ PEDAL CONTROLS
1.
DIRECT LEVEL MIX Control: Adjusts the level of the instrument direct level. This will set the
amount of direct instrument fed in the output mix. If using the IMPRESSION Pedal in a parrallel
effects loop turn this control full counterclockwise. This control can also be used as a main level
control for the direct signal level of your rig.
2.
EFFECT LEVEL MIX Control: Adjusts the mix level of the IMPRESSION effects.
3.
CHORUS ACTIVE LED: Lights when the Chorus effect is active. This LED will also flash at the
modulation rate set by the TAP button.
4.
FLANGE ACTIVE LED: Lights when the Flange effect is active. This LED will also flash at the
modulation rate set by the TAP button.
5.
CHORUS / FLANGE ON / OFF SWITCH: Switches the Chorus or Flange Effect on and off. This
switch will also change from CHORUS to FLANGE by holding the switch down for more than 1
second. Holding the switch down again, will switch from FLANGE back to CHORUS.
6.
DELAY ACTIVE LED: Lights when the DELAY effect is Active. This LED will also flash at a rate equal
to the DELAY time set by the TAP function.
7.
DELAY ON / OFF SWITCH: Switches the DELAY on and off. Holding this switch for more than 1
second will step through 4 settings of DELAY regeneration or repeats. The power up default
setting is a regeneration level of -18db the next settings are -12db, -6db and no regeneration.
8.
REVERB ACTIVE LED: Lights when the REVERB Effect is Active.
9.
REVERB ON / OFF SWITCH: Switches the REVERB on and off. Holding this switch for more than 1
second will change the REVERB mix relative to the other effects in 8 steps. The first step will
decrease the REVERB mix by -1db, the second step will decrease the REVERB mix level by -3db.
Each addtionals step will decrease the REVERB mix level by an additonal 3db as follows. Step 2 =
-3db, Step 3 = -6db, Step 4 = -9db Step 5 = -12db, Step 6 = -15db, Step 7 = -18db, Step 8= -
21db.
10.
TAP SWITCH: This switch is mapped to the last selected effect of CHORUS, FLANGE or DELAY. If
mapped to CHORUS or FLANGE it will set the modulation rate based on the TAP time between two
Summary of Contents for IMPRESSION
Page 1: ......
