5
PLACEMENT
The XMAX is designed to sit directly on the floor or stage. Do not position or mount the
cabinet where it can tip over and fall on someone. Do not attempt to mount the cabinet on
speaker stands. Do not attempt to ‘fly’ (suspend by cables, chains, ropes, etc.) the cabinet. It
was not designed for flying. Position it only on a flat, stable surface where it is not in danger of
tipping over.
Also note that the placement of the cabinet relative to floors and walls will affect the low
frequency response. Placing it closer to the floor and walls will reinforce the low frequency
response. Also make sure that adequate space (at least 6 inches) is left behind the cabinet
for airflow over the internal amplifier heatsink.
A pole mount socket is provided on the top of the XMAX for mounting one of ISP Technologies
Active Series Tripower or VMAX series speakers. A standard 1-3/8 inch pole is required for
mounting the Tripower speakers. To avoid accidents and insure stability this pole length
should not exceed 2 feet in length.
Summary of Contents for XMAX 115 Active Series
Page 1: ...1...
Page 8: ...8 CONNECTION DIAGRAM...
