THERMAL CONDITIONS
The ISP HIGH DEFINITION
LINE 2208 Series is capable of producing in excess of 850 watts
at full power. This generates heat that must be dissipated in order to maintain reliability and
insure the amplifier components stay within their operating temperature specs. To
accomplish this the amplifier is mounted on a heatsink that is internal to the cabinet. Airflow
is forced through a port near the internal heatsink.
In addition the amplifiers are thermally protected internally via a thermal switch which will
attenuate the signal 40db if the heatsink temperature exceeds a certain temperature. When
the temperature drops below a certain point, full signal will be restored. Tests have shown
under extreme conditions that cycling will occur approx. (40 sec. ON, 20 sec. OFF)
It should also be noted that a separate internal thermal breaker also protects the power
transformers. If one power transformer temperature reaches a critical point the internal
thermal breaker will open. If this condition occurs simply reduce the signal level of the
system. This will only occur if the HIGH DEFINITION
LINE 2208 is continually pushed into
heavy distortion.
Summary of Contents for HIGH DEFINITION LINE 2208Active Series
Page 1: ......
