Using the FM radio (first time set up)
1.
Power on the speaker by moving the power switch from
“OFF” to “ON”, you will hear the speaker say “Bluetooth mode”.
2.
Press and release the mode button to switch to “FM mode”.
3.
Press and hold the play/pause/phone button for at least 3
seconds to begin the scan/channel save function.
4.
The speaker will scan and save the FM radio stations with the
strongest frequency. Once the scan/channel save function is
complete the FM radio will start on the first preset.
NOTE:
You must complete the scan/channel save function in
order to have preset radio stations.
5.
Press and release the play/pause/phone button to browse
through the saved presets or press and release the track
buttons to go to specific frequencies.
Troubleshooting
Issue:
My speaker doesn’t turn on.
Solution:
Try the following:
• Make sure that you fully charge your speaker before use.
• Power on the speaker by moving the power switch from
“OFF” to “ON”.
Issue:
My speaker isn’t charging.
Solution:
Try the following:
• Make sure that the charge port on the speaker is free from
dust and debris.
• Make sure that you are using the charge cable that came
with your speaker.
• Make sure there is power from the power source.
Issue:
My speaker isn’t syncing to Bluetooth.
