ISOUND DuraTunes, User Manual

Page: 5 / 28

2.
Plug the Micro-USB end of the cable into the Micro-USB
charge port labeled [ ] located within the closed rubberized
door.
3.
The LED indicator light located next to the phone/Bluetooth
button will turn orange. Once the speaker is fully charged, the
LED indicator light will turn off.
NOTE: When the battery level is below 20%, you will hear a
voice saying “Battery Level Low”, and the volume will lower
automatically to conserve battery. Charge your DuraTunes
with the included charge cable.
Connecting via Bluetooth® (first time set-up)
1. Press and hold the power button located on the side of the
speaker. You will hear a voice say “Bluetooth mode” and the
LED indicator light will rapidly flash blue.
2. Open the settings on your Bluetooth device (Bluetooth must
be enabled).
3. Select DuraTunes from the devices list.
4. Once paired, a voice will say “Bluetooth paired” and the
Bluetooth LED will become solid blue.
5. Volume can be adjusted from your device.
NOTE: Your device will automatically find and pair with the
DuraTunes after the initial pairing. If your device does not
automatically pair, turn off the speaker and repeat steps 1-4.
Connecting via audio cable
1. Press and hold the power button located on the side of the
speaker. You will hear a voice say “Bluetooth mode” and the
LED indicator light will rapidly flash blue.
2. Insert one end of the included audio cable into the AUX port
on the side of the speaker. A voice will say “AUX in mode”.