Isotta ALPHA 6600 Instructions Manual Download Page 12

12

All  camera  controls  are  external  and  are  laser-engraved  with  the  symbols  for  the 

camera functions.

Please refer to the Identification of Parts manual to see all controls of the housing. 

All key 

Sony ALPHA 6600 

camera controls can be accessed. 

The  front  ends  with  the  port/lens  mount  hole  that  allows  to  mount  different  ports. 

Removable port -120 mm bayonet

.

Two  fiber  optic  connections 

allow  the  use  of  external  strobes  through  the  manual 

trigger.  The  housing  features 

three M16 holes 

for  installation  of  accessories,  e.g. 

syncro cords, vacuum valves, monitors.
Above,  the  single-hand  closing  knob  for  closing/opening  the  housing  and  detach  the 
back completely. 

M8 hole

 located on upper side of the housing for various accessories 

such as focus lights, etc.
On both sides you can find ergonomic side handles, adjustable (via optional accessory). 
Wide, rubber covered feet on the bottom for solid footing.

Two M6 holes

 located on the bottom of the housing front side can be used for different 

accessories such as brackets for strobes or tripods.

PARTS OF THE HOUSING

FRONT

An easy and quick release camera mounting plate allows the camera positioning and 
a lever locks the tray inside the housing. The tray is made of plastic material and is 
provided with a not removable screw to fix it on the housing. A lever lock on the tray 
secures  the  camera  when  inserted.  Insert  the  camera  through  the  two  integrated 
guides of the plate support. Slide the lever to the left to lock the camera on the plate; 
to release it slide it to the right.
Dual 

high-quality O-ring

 seals on every movable 

part  protect  and  ensure  a  perfect  and  secure 
watertight.

  

 

OPTIONAL

on  the  upper  side  the  hotshoe 

features the battery powered 

TTL electronic trigger

 

to be connected to the hotshoe of the camera. 
A  special  internal  slot  located  on  the  left  top 
of  the  housing  interior  allows  you  to  lock  the 
hotshoe when not in use. On the upper side there 
is space enough to 

insert the flash FL-LM3

 of 

the camera on the hotshoe of the camera.

INTERIOR

OFF

ON

Summary of Contents for ALPHA 6600

























Reviews: