MEASUREMENT AND ASSEMBLY MANUAL
Validity of the manual: 1. 9. 2014
5
2) If installation height (H0) is specified, the distance from the floor to the bottom part of the pull cord(s) (H1) shall be
at least 1.5 m (see Fig.): H1 > 1.5 m.
b) The distance between two loop strands shall not exceed 50 mm at the output from the fixed tensioning device.
THE PULLEY POSITION SHALL PREVENT EXCESSIVE CHAIN TENSIONING AND THE CHAIN MUST NOT COME
OFF!
WHEN PULLED APART, THE GAP BETWEEN THE CHAIN STRANDS SHALL NOT EXCEED 50 mm!