November 2011
C. Installation
In the interest of safety the unit should be placed upon its own
dedicated shelf on an audio grade equipment rack. The unit may be
placed on top of or under other pieces of equipment, do not exceed a
maximum weight loading of 20kg. Do not place the Solus in areas
where the temperature is likely to exceed 25 degrees. For example,
close proximity to ‘tube’ amplifiers.
Once the Solus is placed connect the unit to a mains wall socket, we
recommend that a good quality cable is used and that the wall socket
is also unswitched. Turn off all equipment you wish to have a clean
mains supply, unplug the cables relating to these from the wall socket
or redundant distribution block you may have been using and plug
these into the rear sockets of the Solus.
We strongly recommend that a good quality mains cable is used and
this cable is consistent throughout your system. Look for a cable with
good conductors, for example oxygen free copper, this cable should
also have a high degree of shielding from RFI.
Placement
Equipment
coupling
System integration
Front & rear of the unit
IEC Inlet
6 high quality UK three pin outputs
Product name badge
LED indicator light
Official EVO3 badge
