7
Power connecting procedure:
STEP 1 – Pull out 6 pin terminal block.
STEP 2 – Connect wire to V1+, V1-, or V2+, V2-, and Ground the neutral wire to the ground screw.
STEP 3– Plug back 6 pin terminal block to its place.
For PW3 connection --- Use an external industrial graded power adapter to make proper connection. Follow
the priority sign V+, V-.
WARNING –
Always ground the power source to remain a clean power input. Too many LOW-END power supplies
produce too much noise which can produce POE detection failure. To avoid this, always ground the
power source to gain a clean power input.
