7
ISOMET
-Enable (LVTTL)
T_DLY
RF Output
-Enable Response
The -ENABLE (active LOW) should be applied 2msec prior to the required active RF output.
The -Enable may remain LOW continuously. The RF amplifiers are design to be biased at 100% duty
factor.
T_DLY = 1.8msec
Pulsed Response
All versions of the RA1170-4 are designed for fast pulse operation up to CW operation
Typical output RF waveform is shown below
45W / 70MHz pulsed output
10%-90% rise / fall time = < 10nsec
