ATTENTION FOR WET LOCATION INSTALLATION
1.
Instruction for seal ring installation
Peel off the paper
Place on the bracket
Press it to make sure it
is pasted properly
2 . Instruction for bracket installation
Tighten the screws
Make sure no gap between the
housing and bracket.
3 . Instruction for clear lens installation
Most important is to PUSH
the middle of the lens to
balance it when tighten
the screws
push
4. Instruction for seal foam installation
Peel off the paper
Paste properly
WARNING:Press the unit to make sure it is
locked onto the wall tightely.
Distance between bracket and
wall should less than 2mm.
5. Instruction for final installation
6. Adjust the angle of the lamp head and
tighten the screws
RWL-C
EXIT & COMBO
Headquarters: 800-888-5483 • 610-647-8200 www.isolite.com Western Office: 800-799-5343 • 805-546-9669