114583 | Sys-Pro Wifi-Bridge Controller incl. Android/iOS app, 5-24V
DC/5V Micro-USB
WiFi-Relay Initializing the Connection
1. Direct connect mode:
Directly connect your smart phone to WiFi-Relay controller. When the signal is not available on your
home network, you only can directly connect to the WiFi-Relay controller:
1)
Power on the WiFi-Relay controller, the LED indicator will turn on white color. After about 5s, the LED indicator
will change yellow color and hold on, it is running direct connect mode.
2)
Enter mobile device's Wi-Fi settings, search and connect WiFi-Relay controller SSID.
WiFi-Relay controller SSID: ISO_Light_Sys_XXXX, XXXX is WiFi-Relay controller’s MAC address.
3)
Open the
ISO Sys Pro
App and start using.
2. Home network connect mode:
Connect the WiFi-Relay controller to your home network (recommend for daily use).
1)
Power on the WiFi-Relay controller, the LED indicator will turn on white color. After about 5s, the LED indicator
will change yellow color and hold on.
2)
Enter mobile device's Wi-Fi settings, search and connect WiFi-Relay controller SSID.
WiFi-Relay controller SSID: ISO_Light_Sys_XXXX, XXXX is WiFi-Relay controller’s MAC address.
3)
Open the ISOLED App and click ,click “Connect home internet network” (Image 1).
then click “OK”. It will automatically search all the wifi router’s SSID around.
4)
Choose the router you want to connect, enter the password and then click “OK” (Image 2). When the WiFi-
Relay controller attempts to connect with the router, the LED will be change blue color and hold on.
5)
Setting up the connection router is completed and start using the ISOLED App.
3. Restore factory settings
Press and hold the WiFi-Relay controller’s reset key (operating time about 10s) and release the key until the
LED change red color, restore factory settings is completed.
V1-N, V1-W Single Color LED Mini RF Controller
User Manual Ver 1.0.2
Page 3
www.iskydance.com
On/Off
Picture
1
Select
WiFi-Bridge
Connect home internet network
Change
WiFi
controllers name
and password
Licht
Szenen
Einstellungen
Efdfsdfsdf WPA1PSKWPA@P
KGGtrehedef chncvd
Gghdf gjfgjgfjg
HJUfsdfsdf WPfdhdfhdf
Efgfgf WPA1PSKWPA@P
Einstellungen
On/Off
WLAN List
Licht
On/Off
Szenen
Connect Home Network
Licht
Szenen
Einstellungen
Rename WiFi controller
Input new password:
Warnung:
Passswort vergessen? Die Reset-Taste
am WiFi-Controller 10 Sekunden lang drücken,
um diesen auf die Werkseinstellungen zurück zu setzen.
OK
Cancel
Passwor
d
:
OK
Cancel
Picture
2
Picture
3
Note:
•
WiFi-Relay controller's SSID name and password can be edited only under the direct connect mode.
Click Settings, then click “Change WiFi-Relay controller's name and password”, enter new name and/or
password (password must be null or 8-20 characters), and click “OK” (Image 3).
•
If you forget password with direct connect mode, please restore factory settings.
•
Under direct connect mode, only one smart phone APP can connect with this WiFi--Relay controller.
•
Under home network connect mode, If the router was changed or lost, and the “ISO
Sys
Pro
” network
cannot be found in the network list, you must restore factory settings, then repeat all the connection steps
from the beginning.
•
If ISO
Sys
Pro
App can not connect the WiFi-Relay controller with home network mode, you may have
entered wrong password, it only do restore the factory settings operation.
•
Under home network connect mode, multiple smart phone APP can connect with this WiFi--Relay controller.
•
Under home network connect mode, if multiple WiFi-relay controller need be connected, every WiFi-relay
controller connect to home network one by one firstly, then click , click “Select WiFi controller” to switch
between
multiple WiFi-relay controller (Image 1). Recommend edit SSID name by direct connect in advance.
