1- When the WIFI LED flashes,
2- Select Protection sensor> Wifi GAS detector
3- Select Confirm that the LED is flashing
4- Check that the SSID of your router, to which the smartphone is
connected, is reported.
The router must work in wifi with 2.4GHz frequency. If it were working at
5GHz, it could not allow the sensor connection. In this case it would be
necessary to access the menu of the router from the PC and activate
the 2.4GHz frequency. In some cases it would be advisable to
temporarily disable the 5GHz band leaving only the 2.4GHz band active.
After pairing the sensor with the router, the 5GHz band can also be
reactivated.
The wifi router's SSID should be no more than 20 characters long.
Enter the Wifi connection password: it must NOT contain special characters or empty spaces. Maximum
length of 32 characters.
Select Confirm
5- Wait for the HEY GAS to complete the connection attempt.
6- Find the device, select Finish. The Wifi LED on the sensor will remain off.
