iSMA-B-MAC36NL
Version 1.0
www.gc5.pl
Page 20 / 24
property, where false causes the graphics to be shown, while true causes the graphics to be
hidden (same variable as for the alarm component above).
Dragging a Boolean component from the Nav tree to a PX file and selecting "From Palette" in
the Make Widget window, and then selecting "From Palette" from the palette of the object
with the "off-on" suffix will automatically pinpoint the dragged component to the control
value described as switching between switch-off and switch-on graphics.
2.10.3
0-100% components
Components with the suffix "0-100" in the name are dedicated to binding Numeric type
variables containing analogue control value in the range of 0% - 100%. Graphics have been
added to these objects to represent the percentage drive of the device. The component has
two control values (Value Binding). The first one affects the switching between the graphics
responsible for the level of adjustment depending on the entered value from 0 to 100. The
second value affects the Visibility property, where false causes the graphics to be shown,
while true causes the graphics to be hidden (same variable as for the alarm component
above).
Dragging a Numeric component from the Nav tree to a PX file and selecting "From Palette" in
the Make Widget window, and then selecting "From Palette" from the palette of the object
with the suffix "0-100" will automatically bind the dragged component to the control value
described as switching between the graphics responsible for the adjustment level.
In the case of tanks, the control value is the level of filling of the tank.
In the case of blinds/roller blinds, the control value is the opening level (0 is a complete
closure). The components "h-spin_0-100" and "v-spin_0-100" from 0 to 50 % open the blinds
and from 51 to 100 % raise them. The “outdoor_0
-
100” component causes lift over the whole
range from 0 to 100 %.