ISM SM301-TH, Instructions For Use And Installation

Page: 30 / 44

30
1-
Pre-use Procedures and Safety Warnings
.
Check during unpacking that the Minibar
is defect free.
The appliance is not intended for use by
young children or infirm persons unless
they have been adequately supervised
by a responsible person to ensure that
they can use the unit safely.
Children should be supervised to ensure
that they do not play with the appliance.
Minibar should be installed on a stable,
smooth & flat surface without the risk of
shaking.
For an optimum performance of the
Minibar, room temperature should be
between 16-
32°C.
The voltage of the Minibar is indicated
on the back of the product and/or on the
label inside the product. Problems
occurred after inappropriate electricity
supply will be out of warranty.
Network connections must be made by
an authorized electrician. Use earthed
socket. Breakdowns causing injuries to
persons or damages to properities will
be out of warranty.
Minibar is designed to cool beverages.
It’s not suitable for keeping food .
If the Minibar is not installed in an open
place but inside a piece of furniture,
appropriate ventilation of the cooling unit
on the back of the Minibar must be
ensured.
Minibar should never be set in an area
directly exposed to sunlight or near other
sources of heat, such as oven, stove,
etc.
If two Minibars are placed next to each
other, there must be a minimum distance
of 10 cm between them and of 6 cm
from their sides. Back ventilation grill
must not be covered in order to provide
good ventilation for the appliance.
Do not store explosive substances such
as aerosol cans with flammable gases in
the Minibar.
Minibar’s ventilation grills can’t be
obstructed in any way.
Do not put oils or oil-cooked meals in
your refrigerator in unsealed containers
as they may damage the surfaces of
your appliance. In case of spilling or
smearing oil on the surfaces, clean and
rinse them with warm water.
Never use gasoline, benzene or similar
substances for cleaning the Minibar.
We recommend you to unplug the
appliance before cleaning.
230
Volt
If the supply cord is damaged, it must be
replaced only by a qualified person in
order to avoid a hazard.
The cooling unit uses R600a, R134a as
the coolant. Cyclopentane, which does
not damage the ozone layer, is used as
propellant for the insulation made from
PU-foam.
EN